Level measurement in the holding tank of a filling system
Share:
Batch holding tank on a filling system
Level measurement in the holding tank of a filling system
Process data
Measuring task
Level measurement
Measuring point
Tank
Measuring range up to
0.3 m
Medium
Conductive solution
Process temperature
+20 ... +50 °C
Process pressure
0 ... +15 bar
Special challenges
Small levels, rapid level changes, Autoclaving
Application
Pharmaceutical products such as drugs and vaccines are held in batch filling holding tanks ready to be filled into injection vials under absolutely sterile conditions. After each batch, the holding tank has to be totally sterilized using an autoclaving procedure. During this process, the sensor is exposed to a pressure of 2.5 bar and a temperature of 130 °C for at least half an hour. The rapidly changing levels of the aqueous liquids are continuously monitored. The rapidly changing levels of the aqueous liquids require continuous and precise monitoring.
Your benefit
Reliable
Approved materials in compliance with FDA and EC 1935/2004
Cost effective
Reliable, continuous operation with absolute hygiene
User friendly
Standardized housing and adjustment concept
Recommended products
VEGAFLEX 83
Level measurement with guided radar in the holding tank of a filling system.
- Autoclavable version ensures absolute hygiene
- Short response time enables detection of quick level changes
- Wetted parts comply with material specification: Basle standard BN2
Measuring range - Distance
32 m
Process temperature
-40 ... 150 °C
Process pressure
-1 ... 16 bar
Inquiry - Level measurement in the holding tank of a filling system
View more
Pharmaceutical
